MWS Centres

Vintage splined centres

MWS splined centres are forged using modern techniques to produce a very strong and durable product. When a component is forged the metal is compacted resulting in improved strength characteristics when compared to cast, pressed or machined parts. The Alvis Jelly Mould centre is produced using a multi-stage forming process incorporating heat treatments to provide the required strength.

Centre sizes are defined by the maximum size of the outer bearing (in mm) which can be used with the hub and do not relate directly to a measurement on the centre itself. Please see the table at the bottom of this page for more information.

Please note: Other vintage centres are available - contact us for details

Click here to go to the Vintage Centres section of our Shop

Part Number	Description
Vintage Splined Centres
WSSI-32/2PC-UND	32mm Two-piece Plain Carbon Steel Centre - Undrilled
WSSTABMDRILLED	MG TA Carbon Steel Centre - 48 Spoke
WSSTACD	MG TA Chrome Centre - 48 Spoke
WSSTCBM	MG TC Carbon Steel Centre - Undrilled
WSSTCBMDRILLED	MG TC Carbon Steel Centre - 48 Spoke
WSSTCCD	MG TC Chrome Centre - 48 Spoke

WSSI-42/1PLN-60S	42mm One-piece Plain Carbon Steel Centre - 60 Spoke
WSSI-42/1PLN-70S	42mm One-piece Plain Carbon Steel Centre - 70 Spoke
WSSI-42/1PLN-UND	42mm One-piece Plain Carbon Steel Centre - Undrilled
WSSI-42/1RIB-60S	42mm One-piece Ribbed Carbon Steel Centre - 60 Spoke
WSSI-42/1RIB-UND	42mm One-piece Ribbed Carbon Steel Centre - Undrilled
WSSI-42/2PC-70S	42mm Two-piece Plain Carbon Steel Centre - 70 Spoke
WSSI-42/2PC-UND	42mm Two-piece Plain Carbon Steel Centre - Undrilled

WSSI-52/1PLN-60S	52mm One-piece Plain Carbon Steel Centre - 60 Spoke
WSSI-52/1PLN-70S	52mm One-piece Plain Carbon Steel Centre - 70 Spoke
WSSI-52/1PLN-72S	52mm One-piece Plain Carbon Steel Centre - 72 Spoke
WSSI-52/1PLN-UND	52mm One-piece Plain Carbon Steel Centre - Undrilled
WSSI-52/1RIB-54S	52mm One-piece Ribbed Carbon Steel Centre - 54 Spoke
WSSI-52/1RIB-UND	52mm One-piece Ribbed Carbon Steel Centre - Undrilled
WSSI-52/2PC-UND	52mm Two-piece Plain Carbon Steel Centre - Undrilled
WSSI-52/2PC-135	52mm Two-piece Plain Carbon Steel Centre - 135mm

WSSI-62/2PC70SPK	62mm Two-piece Plain Carbon Steel Centre - 70 Spoke
WSSI-62/2PC-UND	62mm Two-piece Plain Carbon Steel Centre - Undrilled

WSSI-72/1PLN-70S	72mm One-piece Plain Carbon Steel Centre - 70 Spoke
WSSI-72/1PLN-UND	72mm One-piece Plain Carbon Steel Centre - Undrilled

WSSN802PBENTLEY	80mm Two-piece Bentley Carbon Steel Centre - Undrilled

WSSI-JELLYMOULD	Alvis Jelly Mould Centre - Undrilled
WSSI-JELMOULD-A	Alvis Jelly Mould Centre - Drilled for Inner & Outer Lacing
WSSI-JELMOULD-B	Alvis Jelly Mould Centre - Drilled for Two Line Lacing

The table below is an abbreviated version - the full table can be found here

Wheel Type Note 1	Actual Hub Diameter Note 2
42	62.5 mm
52	73 mm
62	82.5 mm
72	92 mm
80	102 mm

Note 1:	The wheel type designation refers to the maximum size of outer bearing, in millimetres, which can be used with the hub.
Note 2:	Actual hub diameter is measured across the outside of the splines of the hub on the car, not the wheel centre. Dimensions are ±½mm.

UK Sales: 01753 549 360 UK Fax: 01753 547 170		Export Sales: +44 (0) 1753 598 382
Motor Wheel Service International Ltd, Units 1-4 Elder Way, Waterside Drive, Langley, Slough, Berkshire, SL3 6EP, UK

Sitemap | Webmaster | Contact Us | Terms and Conditions | Powered by vcGenius